Micro-Nano Development Research Centre

(a) Brief write up on the Lab/Group:

Nanotechnology is recognized as including promising new techniques that overcome the limitations posed by conventional ones. There is plenty of nanotechnology applications currently in use today, such as the composition of ultra-high functional materials, ultrafine fabrication, single-molecular measurement, and single-molecular operation. It was under these circumstances that the High-Tech Research Center was drawn up in the 2015 academic year with the goal of developing highly functional nanomaterials and researching micro-nano mechatronics devices. To achieve these research goals, we established the Micro-Nano Development Research Center (MNDRC). 

(b) Major Equipments:
S. No. NAME OF EQUIPMENT QUANTITY
1 BATH SONICATOR 1
2

VACCUM OVEN

1
3

MAGNETIC STIRRER (WITH HOT PLATE)

1
4 PROBE SONICATOR 1
5 ANALYTICAL BALANCE 1
6 ELECTRICAL DISCHARGE MACHINE 1
7 NANO FLUID PHE EXPERIMENTAL SET UP 1
8 NANO FLUID SOLAR EXPERIMENTAL SET UP 1
9

COMPUTERS
(i) HP Z420 WORK STATION
(ii) HP 400G2MT

2
1
(c) Software:

MATLAB and ANSYS 

(d) Projects completed & ongoing in the Lab-UG, PG & Ph.D:

UG:

Session Title Guide
2018-19 To Calculate MRR and tool wear using copper electrode and steel work piece Mr. Kuwar Mausam
To development of die of connecting rod and chess piece Mr. Kuwar Mausam
To Calculate MRR using tungstun electrode and steel work piece Mr. Ravindra Pratap
To Calculate MRR using copper electrode and steel workpiece Mr. Vikas Sharma
Photo thermal analysis of FPSC using nanofluid Dr. sujit kr verma
2017-18 PERFORMANCE EVALUTION OF PARABOLIC TROUGH COLLECTOR (DUEL AXIS) USING NANO FLUID AS WORKING FLUID MR.GAURAV BHARADWAJ
THERMAL CHARACTERTICS OF HEAT PIPE USING NANOFLUIDS MR.NAVEEN KUMAR GUPTA
FORMATION AND EXAMINE OF COMPOSITE MATERIAL MR.BHARAT SINGH CHAHAR
Mechanical characterization of carboxyl Acid functionalized with Graphene Mr. Pradeep kumar singh
2016-17 The Effect of Nano Fluid on Heat Transfer Performane of Plate Heat Exchanger (PHE) Mr. Vikas Kumar
Optimize of process parameters of titanium by using EDM Machine Mr. Avdhesh Sharma
synthesis and dynamix mechanical analysis of hybrid reinformed polymer composites Mr. Alok Soni
Tribological & Mechanical Analysis of Fish's Fins Reinforced With Epoxy Mr. Pradeep Kumar Singh
Development of Multinome point EDM Electrode for Metallic Material Using Optimization Techniques and optimization of process parameter Mr. Kuwar Mausam
Mechanical Characterization of Amine Functionalised Graphene Epoxy Composite Dr. Kamal Sharma
2015-16 The Effect of using Nano particle on corrugated plate heat exchanger performance Dr. Arun Kumar Tiwari
Analysis of composite flywheel Prof. Kamal Sharma
Comparative investigation of mechanical properties of metal and plastic Based composite with impact of wood dust Mr. Kuwar Mausam
Investigation of process parameter of EDM for carbon fibre material using teaching learning approach Mr. Kuwar Mausam
Investigation of optimum process parameter of EDM for Ti6Al4V using ANN Approach Mr. Pradeep Kumar Singh
Particle size analysis and mechanical characterization of reinforced epoxy polymer Mr. Pankaj Sonia

PG:

Session Title Guide
2017 EXPERIMENTAL INVESTIGATIONAND SIMULATION OF THERMO-MECHANICAL
PROPERTIES OF AMINE FUNCTIONALIZED GRAPHENE BASED EPOXY NANOCOMPOSITES		 Dr. Kamal Sharma
EXPERIMENTAL INVESTIGATION OF MECHANICAL PROPERTIES OF GLASS WOOL
FIBER MATERIAL BASED ON EPOXY NANOCOMPOSITES		 Dr. Vijay Kumar Dwivedi
2016

 

 Molecular Dynamics Simulations of Mechanical and Visco-elastic Performance
of Defect Free and Defective Carbon Nanotubes and their Composites		 Dr. Kamal Sharma
Evaluation and Prediction of the Mechanical Properties of High-Density
Polyethylene Grade P5300 using Molecular Dynamics		 Dr. Vijay Kumar Dwivedi
2015 Modeling and Experimental Analysis of Visco-elastic Behaviour of
Alumina Nanorods Reinforced Epoxy composite		 Dr. Kamal Sharma
Experimental Analysis and Optimization of Thermo Mechanical
Properties of Three Phase Carbon Fiber Epoxy Nanocomposites		 Dr. Kamal Sharma

Ph.D:

Session Title Guide
2018 Amine Functionalized Graphene Epoxy Nanocomposites: Simulation & Characterization Dr. Kamal Sharma
(e) List of Publications:

xcvbnm,./

(1) Sharma, K.; Shukla, M., Molecular dynamics simulation of influence of amine functionalization on interfacial bonding characteristics of multi-walled carbon nanotube epoxy composites. Computational Materials Science, 2015 vol 99, pp. 232-241. SCI Journal Impact Factor – 1.974.

(2) Sharma, K.; Shukla, M., Processing, characterization, and modeling of amine functionalized carbon nanotubes incorporated carbon fiber/epoxy composites. Journal of Nanomaterials,vol. 2014, pp. 1-10. SCI Journal, Impact Factor – 1.574.

(3) Sharma, K.; Shukla, M., Processing, characterization and modeling of multiscale three phase functionalized carbon nanotube-epoxy-carbon fiber composites. Computational Materials Science, (Under review). SCI Journal Impact Factor – 1.974.

 (4) Sharma, K.; Shukla, M., Molecular modeling of mechanical behavior of amine functionalized multiwalled carbon nanotubes/epoxy composites. New Carbon Materials 2014 vol 29 (2), pp132-142. SCI Journal, Impact Factor – 0.98.

(5) Sharma K and Shukla M, Experimental Study of Mechanical Properties of Multi-scale Carbon fiber-Epoxy-CNT composites by, Advanced Materials Research Journal (ISSN: 1022-6680) pp.2723-2728.http://www.ttp.net/978-3-03785-295-8/46.html

(6) Pradeep Kumar Singh; Kamal Sharma, "Mechanical and Viscoelastic Properties of In-situ Amine Functionalized Multiple Layer Grpahene /epoxy Nanocomposites" Current Nanoscience (SCI), Vol. 14, Issue 3, pp. 252-262, 2018.

(7) Anurag Yadav; Amit Kumar; Pradeep Kumar Singh; Kamal Sharma, "Glass transition temperature of functionalized graphene epoxy composites using molecular dynamics simulation" Integrated Ferroelectrics (SCI), Vol. 186, Issue 1, pp. 106-114, 2018.

(8) Pradeep Kumar Singh; Kamal Sharma; Amit Kumar; Mukul Shukla, "Effects of Functionalization on the mechanical properties of multi-walled carbon nanotubes: A molecular dynamics approach, "Journal of Composite Materials (SCI), Vol. 51, Issue 5, pp. 671-680,2016/2017.

(9) "Mausam Kuwar, Sharma Kamal "Molecular Dynamics Simulation Study of Novel Properties of Defect Full Single Walled Carbon Nanotubes" in International Journal of Application or Innovation in Engineering & Management, ISSN 2319 – 4847, Volume 2, Issue 2, February 2013.

(10) Mohit Tiwari, Kuwar Mausam, Kamal Sharma, Ravindra Pratap Singh. "Experimental Analysis of Electro-Discharge Machining Parameters for Minimum Tool Wear Rate on Machinability of Carbon Fiber/Epoxy Composites Using Taguchi Method", International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 2 Issue 10, October – 2013 pp. 3182-3188.

(11) Kuwar Mausam, Mohit Tiwari, Kamal Sharma, Ravindra Pratap Singh. "Process Parameter Optimization for Maximum Material Removal Rate in High Speed Electro-Discharge Machining", International Symposium on Engineering and Technology, 9-10 January, 2014 organized by KJEI's Trinity College of Engineering and Research, Pune. ", International Journal of Current Engineering & Technology ,(ISSN: 2277-4106, 2013 pp. 239-244).

(12) Mohit Tiwari, Kuwar Mausam, Kamal Sharma, Ravindra Pratap Singh. "Investigate the Optimal Combination of Process Parameters by Using a Grey Relational Analysis", Procedia Materials Science 5 ( 2014 ) 1736 – 1744.

(13) Kanishka Sen Kaushalyayan, Kamal Sharma, Kuwar Mausam, "Effect Of Amino Functionalized Carbon Nanotubes On Thermal Mechanical Properties Of Multi-Walled Carbon Nanotube/Epoxy Composite", Advanced Science Letters, Volume 21, Number 9, September 2015, pp. 2790-2793.

(14) Payal Sharma, Pankaj Sonia, Kamal Sharma, Kuwar Mausam, "Dynamic Mechanical Properties of Epoxy Composites Reinforced with Alumina Nanorods" Advanced Science Letters, Volume 21, Number 9, September 2015, pp. 2833-2835.

(15) S.K. Verma, A.K. Tiwari, M. Tripathi. An evaluative observation on impact of optical properties of nanofluids in performance of photo-thermal concentrating systems. Solar Energy. 176 (2018) 709-24. ( SCI Elsevier:Impact Factor:4.37)

(16) S.K. Verma, A.K. Tiwari, D.S. Chauhan. Experimental evaluation of flat plate solar collector using nanofluids. Energy Conversion and Management. 134 (2017) 103-15. (SCI Elsevier: Impact Factor:6.377, Citations 37)

(17) S.K. Verma, A.K. Tiwari, D.S. Chauhan. Performance augmentation in flat plate solar collector using MgO/water nanofluid. Energy Conversion and Management. 124 (2016) 607-17.(SCI -Elsevier: Impact Factor:6.377, Citations 25)

(18) Investigation of Thermal Efficiency and Depth of Penetration during GTAW Process

(19) Precipitation Behaviour of Microalloyed Steel During Hot Deformation